Distributors & Wholesalers of Quality Fabrication Equipment

Looking for a specific product?
[et_pb_ecwid admin_label=”Ecwid”]

Big Bore Heavy Duty Precision Lathes - W Series - Model 3560W-35200W, 4060W-40200W, 4580W-45200W, 5060W-50200W

SKU 3560W-35200W, 4060W-40200W, 4580W-45200W, 5060W-50200W
$0.00
In stock
1
Product Details
The W series lathes are available with spindle bore of 6" 9" 12" and 14", swing from 35" to 50" and distance between centers from 60" to 200". Double chucks are available as options.

FEATURES:

Headstock is made out of high tensile strength (FC-30) Alloy Castings.
Thick casting wall, heavy internal ribbing, and tubular casting ensure high rigidity under heavy cutting conditions.
Hardened and Ground spindle is precision machined from a massive one-piece forging. The spindle is mounted on two high precision tapered roller bearings at the front and rear to take up the radial and axial load (three bearings on 6" spindle bore machines).
Spindle has electromagnetic brake and jog control.
6 way power feed and rapid traverse control the carriage, cross slide and the compound.
Powered compound enhances key-way cutting operations.
Compound can swivel 360 degrees to cut at any angle.
Built-in conduits housing electrical wires, coolant pipes, lube lines and air lines (air lines allow hoses to be attached to the front of the carriage to blow away dirt and chips).
All gears are hardened and mounted on bearings for ease of shifting.
Gearbox assembly is oil pump lubricated for smooth operation and quiet running.
Totally enclosed quick change feed gearbox allows easy selection of threads and feeds without use of change gears.
The bed is made from one massive solid casting that forms the bed ways and the base.
Induction hardened and precision ground hardness exceeds 450B.
The additional bed way that supports the bottom of the apron is also hardened and ground (This design of multiple supports for carriage and apron greatly enhances the machine stability under large facing and turning operations).
SPECIFICATIONS:

3560W- 35200W 4060W- 40200W 4580W- 45200W 5060W- 50200W
CAPACITY
Swing Over Bed 35" 40" 45" 50"
Swing Over Cross Slide 24" 29" 34" 40"
Swing Over Gap 53" 58" 63" 69"
Gap Width 24" 24" 24" 24"
Distance Between Centers* 60"-200" 60"-200" 60"-200" 60"-200"
Bed Width 25.5" 25.5" 25.5" 25.5"
HEADSTOCK
Spindle Taper A2-11 A2-11 A2-11 A2-11
Spindle Bore 6.02" ** 6.02" ** 6.02" ** 6.02" **
Spindle Speeds (18) 6 to 750 rpm 6 to 750 rpm 6 to 750 rpm 6 to 750 rpm
Variable speed (4 steps gear change) (optional) 12- 1,000 rpm 12- 1,000 rpm 12- 1,000 rpm 12- 1,000 rpm
CARRIAGE
Cross Slide Travel 26.4" 26.4" 26.4" 26.4"
Compound Travel 17.7" 17.7" 17.7" 17.7"
Longitudinal Feeds 0.0018 to 0.1 in/rev. 0.0018 to 0.1 in/rev. 0.0018 to 0.1 in/rev. 0.0018 to 0.1 in/rev.
Cross-Feeds 0.0009 to 0.05 in/rev. 0.0009 to 0.05 in/rev. 0.0009 to 0.05 in/rev. 0.0009 to 0.05 in/rev.
Longitudinal Rapid Feeds 80 inches per minute 80 inches per minute 80 inches per minute 80 inches per minute
Cross Rapid Feeds 40 inches per minute 40 inches per minute 40 inches per minute 40 inches per minute
Lead screw Pitch 2 TPI 2 TPI 2 TPI 2 TPI
THREADS
Inch Threads 1/2 to 28 TPI (60 threads) 1/2 to 28 TPI (60 threads) 1/2 to 28 TPI (60 threads) 1/2 to 28 TPI (60 threads)
Metric Threads 1 to 56mm (60 threads) 1 to 56mm (60 threads) 1 to 56mm (60 threads) 1 to 56mm (60 threads)
D.P. Threads 2 to 112 DP (60 threads) 2 to 112 DP (60 threads) 2 to 112 DP (60 threads) 2 to 112 DP (60 threads)
M.P. Threads 0.25 to 14 MP (60 threads) 0.25 to 14 MP (60 threads) 0.25 to 14 MP (60 threads) 0.25 to 14 MP (60 threads)
TAILSTOCK
Quill Diameter 4.5" 4.5" 4.5" 4.5"
Quill Travel 7.87" 7.87" 7.87" 7.87"
Quill Taper MT#6 MT#6 MT#6 MT#6
GENERAL
Motor (220V/440V), Variable speed model 220V only 30 hp 30 hp 30 hp 30 hp
Net Weight (lbs.) 16,500-
55,000 27,000-
57,200 17,650-
58,700 18,300-
61,400
STANDARD ACCESSORIES:
Coolant System
Halogen Work Light
Spindle Sleeve
Dead Centers (2)
Chip Guard on Compound
Index able 4 way Tool post
Tool Box and Tools

OPTIONAL ACCESSORIES:
6", 9", 12", 14", 16", 21", 24" spindle bore
Variable spindle speed, 4 steps gear change, 12-1,000 rpm
Centers distance of up to 480"
4 Jaw Chuck (Steel), 26", 32", 36", Capacity
Face Plate w/ 4 Jaws, 32", 36", 40", 45" Capacity
Steady Rest w/Bearing, 1.18" to 15.77" Capacity
Steady Rest w/ Bearing, 13.8" to 27.55" Capacity
Follow Rest, 1.2" to 8.66" Capacity
Rear Chuck Adaptor (Cast Iron) for 6", 9", 12", 14" 16" Hole
Roller Supporter (Mount on Bed way)
Taper Attachment (Factory Installed Only)
Transformer for 440V
Semi-Auto turn & Thread Cycle (Factory installed Only)
Digital Readout System: Acu-Rite 200T, Sony Latheman, Newall Topaz
440V Transformer for variable speed model
Save this product for later
[/et_pb_ecwid]